Table of Contents
Advertisement
Feature #20
As explained for the previous feature, this feature controls the automatic
unlocking of all doors except the driver's door if Driver's Door Priority is
installed.
Programming Unlock #2 When Ignition Is Turned Off:
Follow Steps 1 to 4 on page 20; at Step 4 the Valet Switch will be pressed
and released twenty times. The system's response will be twenty siren
chirps, and the Status Light flashing twenty times, pausing, then repeating.
Within 10 seconds, press and release the transmitter's Large Upper Button
to turn on "Unlock #2 When Ignition Turned Off" (the siren will chirp once)
or the Small Lower Button to turn this feature off (the siren will chirp twice).
Feature #21
This feature cancels the automatic locking or unlocking of the vehicle's
doors when the ignition switch is turned on or off if one of the doors is open.
This feature can be useful, for example, for leaving others within a locked
vehicle when only the driver exits the vehicle. Features #18, #19, or #20
must be turned on for this feature to operate.
Programming Open Door Bypass Of Ignition Locking:
Follow Steps 1 to 4 on page 20; at Step 4 the Valet Switch will be pressed
and released twenty one times. The system's response will be twenty one
siren chirps, and the Status Light flashing twenty one times, pausing, then
repeating. Within 10 seconds, press and release the transmitter's Large
Upper Button to turn on "Open Door Bypass Of Ignition Locking" (the siren
will chirp once) or the Small Lower Button to turn this feature off (the siren
will chirp twice).
Feature #22
(Factory Default Setting 1 Button Operation)
This feature changes the configuration of how the transmitter operates
the system. In the factory default setting of "1 Button Operation", a single
transmitter button alternates Arming and Disarming the system with every
press of the button. When this feature is programmed to the "2 Button
Unlock #2 When Ignition Is Turned Off
(Factory Default Setting On)
Open Door Bypass Of Ignition Locking
(Factory Default Setting On)
1 Or 2 Button Transmitter Operation
Page 31
Advertisement
Table of Contents
