Dual-Zone Infrasonic Impact Sensor; Remote Sensor Bypass - Crime Guard 533i 3 Operation Manual

DUAL-ZONE IMPACT SENSOR
Sensors: The Crime Guard 533i
Zone Infrasonic Impact Sensor to increase the effectiveness of the system.
The impact sensor is just one in a comprehensive line of available sensors.
Other available options are: glass tampering sensors, piezo shock sensors,
and microwave/radar sensors which can detect motion inside and outside the
vehicle. Your Crime Guard dealer can provide details on the complete line
of sensors and help determine which sensor or sensors are best suited for your
needs.
- The system will automatically bypass the sensor zone if it is triggered five
times during a single armed period. If desired, this feature can be
programmed to not operate.
Prewarning Detection Circuit: When the sensor's prewarn zone is
violated the security system will respond by chirping the siren three times
and relocking all of the doors.* If the prewarn circuit is triggered five times
while the system is armed, the circuit will automatically shutdown until the
security system is disarmed and armed again.

REMOTE SENSOR BYPASS

To Activate Remote Sensor Bypass:
First Arm the System, then within 4 Seconds Press &
Release the Small Lower Button.
1
Remote Sensor Bypass allows the option of "turning off" the sensor any-
time the system is armed using the transmitter. When the sensor is by-
passed, only the sensor zone is bypassed and all other protected zones will
remain fully operational and vigilant. The sensor zone will reset to its nor-
mal operation the next time the system arms.
* An optional doorlock interface must be installed.
3
security system is equipped with a Dual-
THE SIREN WILL CHIRP TWICE TO
CONFIRM ARMING
THE SIREN THEN CHIRPS ONCE
TO CONFIRM SENSOR BYPASS
2
Page 16
THE PARKING LIGHTS
WILL FLASH TWICE
TO CONFIRM
THE DOORS WILL LOCK
UPON ARMING*
ARMING