Table of Contents
Advertisement
Feature #6
This feature configures the Auxiliary Output #2 to automatically Disarm
the system at the same when it is used.
Programming Auxiliary Channel #2 Disarms System:
Follow Steps 1 to 4 on page 20; at Step 4 the Valet Switch will be pressed
and released six times. The system's response will be six siren chirps, and
the Status Light flashing six times, pausing, then repeating. Within 10
seconds, press and release the transmitter's Large Upper Button to have the
system Disarm when Auxiliary Output #2 is used (the siren will chirp once)
or the Small Lower Button to have Auxiliary Output #2 not Disarm the
system when it is used (the siren will chirp twice).
Feature #7
This feature configures the system to automatically Arm itself 30
seconds after the vehicle's last door is closed.
Programming Last Door Arming:
Follow Steps 1 to 4 on page 20; at Step 4 the Valet Switch will be pressed
and released seven times. The system's response will be seven siren chirps,
and the Status Light flashing seven times, pausing, then repeating. Within
10 seconds, press and release the transmitter's Large Upper Button to turn
on Last Door Arming (the siren will chirp once) or the Small Lower Button
to turn off Last Door Arming (the siren will chirp twice).
Feature #8
This feature adds the automatic locking of the doors to the previous
feature, Last Door Arming. If this feature is turned on, the doors will lock
when the system becomes armed 30 seconds after closing the last door.
Feature #7 must be turned on for this feature to operate.
Programming Doors Lock With Last Door Arming:
Follow Steps 1 to 4 on page 20; at Step 4 the Valet Switch will be pressed
and released eight times. The system's response will be eight siren chirps,
Auxiliary Output #2 Also Disarms System
(Factory Default Setting On)
(Factory Default Setting On)
Doors Lock With Last Door Arming
Page 25
Last Door Arming
(Factory Default Setting Off)
Advertisement
Table of Contents
