Related Topics - Canon MX920 series Online Manual

For Two-Sided, select either Long-Edge binding or Short-Edge binding.
4. Select Margin from the pop-up menu on the Print Dialog
5. Set the stapling margin
If necessary, set the Margin width, and to change the Stapling Side, select a setting from the list.
Note
Depending on the Two-Sided setting in the Layout pop-up menu, the Stapling Side that can
be selected differs.
6. Complete the setup
Click Print.
When you execute print, duplex printing will be started.
Important
When a media type other than Plain Paper, Hagaki A, or Hagaki is selected from Media Type
menu of Quality & Media, duplex printing cannot be executed.
When borderless printing is set, duplex printing cannot be executed.
Duplex printing can be performed only when one of the following paper sizes is selected from Paper
Size.
US Letter, A5, A4, JIS B5 (B5 JIS), Postcard
After printing the front page, there is an ink drying wait time before starting to print the back page
(Operation stops temporarily). Do not touch the paper during this time. You can change the ink drying
wait time from Custom Settings in the Canon IJ Printer Utility.
When you use the automatic duplex printing function to print a postcard, print the address side first
and then print the message side.
Note
If the back side of the paper becomes smudged during duplex printing, display the pop-up menu of
Canon IJ Printer Utility, select Cleaning from the menu, and then perform Bottom Plate Cleaning.
When you use duplex printing, the print area becomes slightly smaller than the normal print area.

Related Topics

Cleaning Inside the Machine
Changing the Machine Operation Mode