Continuous Mode; Self-Timer - Canon PowerShot A100 User Manual

G Shooting G

Continuous Mode

The camera will shoot continuously when the
shutter button is pressed. The shooting speed
is as follows.*
PowerShot A200: approx. 2 images per second
PowerShot A100: approx. 3 images per second
* Large / Fine, LCD monitor off mode.
(These figures reflect standard Canon testing
conditions. The actual figures will vary accord-
ing to the shooting conditions.)
1
Press the
sary so that
monitor.
2
Shoot the image.
If internal memory becomes full, interval
between shots may lengthen slightly.
If you are using the flash, shots are taken
more slowly to allow time for the flash to re-
charge.
46
/ button as neces-
appears on the LCD

Self-Timer

1
Press the
necessary so that
the LCD monitor.
2
Shoot the image.
• The self-timer starts when the shutter
button is pressed. The self-timer lamp will
flash. The image will be shot after
approximately 10 seconds. The blinking will
speed up approximately 2 seconds before
the shutter activates.
/ button as
appears on