Continuous Mode - Canon Powershot G1 User Manual

Continuous Mode

Use this mode to shoot successive frames while the shutter button is pressed.
• This mode cannot be selected in the
• An externally mounted flash will not fire in this mode.
• The built-in flash can be used, but the interval between images will lengthen to
accommodate the flash recharge time.
• Successive frames can be shot until the CF card is filled.
• The interval between frames may lengthen somewhat when the internal memory
gets full.
• Turning the camera off cancels the setting.
52
Shooting - Letting the Camera Select Settings
Press the
1
• Press the
the icon in the display panel. The icon will
also appear in the LCD monitor if it is on.
• You can cancel the continuous mode by
pressing the
disappears.
Press the shutter button halfway to
2
lock the focus.
Press the shutter button all the way to
3
shoot.
• While the shutter button is pressed all the way,
shots are taken at approximately 1.7 images
per second* when the image quality is set to
Large / Fine and the LCD monitor is off. Release
the shutter button to stop shooting.
*
This figure reflects standard shooting conditions
established by Canon. Actual figures may vary
according to the subject and shooting conditions.
,
button.
button several times to display
button until the
or shooting mode.
icon