Canon PowerShot A100 User Manual page 28

G Basic Functions G
Replay Mode
The power will automatically shut off approxi-
mately 5 minutes after the last function is
accessed.
While Connected to a Printer (optional)
The power will automatically shut off approxi-
mately 5 minutes after the last camera function
is accessed or printer ceases to print an image.
While Connected to a Computer
A warning message will appear on the
computer screen approximately 5 minutes
after the last function is accessed. The power
will automatically shut off approximately 1
minute later if no functions are accessed.
• The power save function will not activate while
the camera is in auto play mode (p. 63).
• The camera's settings can be changed to turn
off the power save function (p. 90).
• The LCD monitor will go off in approximately 3
minutes if there are no operations performed
within that time when the LCD monitor is on,
even if the power save function is [Off].
Pressing any button turns the LCD monitor on
again.
To return from power save function
Shooting Mode
Slide the lever of lens cover down.
28
Replay Mode / While Connecting to a Printer /
Computer
Press the button.
Switching between Shooting/Replay
You can quickly switch between the Shooting
and Replay modes. Images can be replayed and
erased immediately after shooting them.
Images can also be shot immediately, while im-
ages are being replayed.
Shooting Mode
1
Press the
play mode.
Press the button again or press the shutter
button halfway to return to the Shooting mode.
Replay Mode
1
Open the lens cover or slide the le-
ver of the lens cover down to switch
to Shooting mode.
button to switch to Re-