Battery Status Indications - Canon PowerShot A100 User Manual

Hide thumbs Also See for PowerShot A100:
Table of Contents

Advertisement

Battery Status Indications

The LCD monitor displays an icon or message
to let you know when batteries are low or
depleted.
Batteries are beginning to run low.
Replace (or recharge) batteries
promptly. If the LCD monitor is off, this
icon will appear when you press any of
the following buttons: ,
SET, DISP or
Change
Batteries are fully depleted and the
the batteries
camera can no longer operate. Replace
the batteries immediately.
/
,
/
/ WB /
.
G Preparing the Camera G
About CF Cards
CF cards are high-precision electronic
devices. Do not bend them, apply force to
them, or subject them to shocks or vibration.
Do not attempt to disassemble or alter a CF
card.
Moving a CF card rapidly between tempera-
ture extremes will cause condensation to form
in the card and lead to a malfunction. To avoid
condensation, place the CF card in a sealed
plastic bag before moving it into a different
temperature zone and allow it to adjust slowly
to the new temperature. If condensation
forms on the CF card, store it at room
temperature until the water droplets have
evaporated naturally.
Do not use or store CF cards in the following
types of location.
• Locations subject to dust or sand
• Locations subject to high humidity and high
temperatures
23

Advertisement

Table of Contents
loading

This manual is also suitable for:

Powershot a200

Table of Contents