Table of Contents
Advertisement
19
STORAGE
19.2
Preparing for use after storage
–
Raise the motorcycle with the front wheel stand. (
–
Cover the motorcycle with a tarp or similar cover that is permeable to air.
Info
Do not use non-porous materials since they prevent humidity from escaping,
thus causing corrosion.
Avoid running the engine for a short time only. Since the engine cannot warm
up properly, the water vapor produced during combustion condenses and causes
valves and exhaust system to rust.
–
Take the motorcycle off of the front wheel stand. (
–
Take the motorcycle off of the rear wheel stand. (
–
Install the battery.
–
Set the clock. (
–
Perform checks and maintenance steps when preparing for use. (
–
Take a test ride.
401059-01
(
p. 115)
p. 47)
p. 78)
p. 79)
p. 77)
p. 60)
154
Advertisement
Table of Contents
