Joyner JNSZ1100SV Owner's Manual page 74

6.3. Installation of new lubricating oil collecting and
filtering device, oil pump collecting and filtering
device
[Torque] 6±1N.m
6.4. Assembling of oil pan
6.4.1. Clear the mating surface with the cylinder body
6.4.2. Apply sealing silica before assembling
[Grease] Letai 5699
Attention
·The liquid cushion with silica line diameter of
ф3-4mm, without any broken section
·Make the assembly in 15 minutes after the
Front
Rear
application of silica
6.4.3. Tighten in the sequence shown in the right
figure with the torque of 6±1N.m from the center to
the two sides