13. Oil pump
1. Configuration diagram (The dismounting and installation of the lubricating oil pump
should be carried out according to the following procedures).
① Oil pan, tighten bolt: 8±2 Nm② Oil strainer③ Oil collector gasket④ Oil pump⑤ Oil
pump gasket⑥ Rear oil seal bracket
2. Dismounting
2.1. The engine being turned upside down on
the dismounting frame, take off the bolts.
Remove the oil pan from the cylinder
body.
Attention: Do not make the oil pan flange
section to be deformed.
Non-reusable part