Volvo S 90 Owner's Manual page 175

Linking a remote key to a driver
profile
A remote key can be linked to a driver profile,
which means that all of the settings stored in the
driver profile will apply each time that particular
remote key is used with the vehicle.
A remote key is not initially linked to a specific
driver profile. When the key is used to unlock the
vehicle/start the engine for the first time, the
Guest
profile will be used.
A driver profile can be selected manually each
time the vehicle is unlocked/started without a
remote key being linked to that profile. When the
vehicle is started, the most recently selected
driver profile will be activated. If the key has previ-
ously been linked to a driver profile, it is not nec-
essary to manually select a profile when that par-
ticular key is used.
Linking a remote key to a driver profile
for the first time
Select a profile to link to the remote key (if that
profile is not already active).
1. Pull down the center display's Top view and
Settings
tap .
2. Tap
System Driver Profile.
3. Tap the profile to be linked to the remote
Guest
key. The profile cannot be linked to a
remote key.
4. Open Top view in the center display and tap
Settings System Driver Profile
Edit Profile.
Connect key
5. Select to link the selected pro-
file to the remote key currently being used. A
profile can only be linked to the remote key
that is currently being used. If there are sev-
eral keys in the vehicle at the same time,
More than one key is found, put the key
you want to connect on backup reader
will be displayed.
Location of the backup reader in the tunnel console
Profile connected to key
> When
played, the remote key and the selected
driver profile have been linked.
OK
6. Tap to confirm.
> The key currently in use will remain linked
to the selected driver profile as long as
Connect key
the box is not deselected.
INSTRUMENTS AND CONTROLS
Related information
•
Driver profiles (p. 170)
•
Editing a driver profile (p. 172)
•
Remote key (p. 216)
is dis-
173