Vhf Console - Furuno FM-8900S Installation Manual

2. CONNECTIONS
2.12

VHF Console

Install the VHF console following Chapter 3, then following the procedure in this sec-
tion.
VHF console
1. Remove the cover assembly and printer assembly (or concealing lid) from the
console. For the printer assembly, remove the cables connected to the transceiver
unit and the terminal board.
Cover assy.
2. Connect the power cable from the power supply to the terminal board 1 (+) and 2
(-).
Power
cable
Printer assy.
(or concealing lid)
Terminal Board Connection
1. Process conductor
Terminal
2. Wiring
board
1) Insert screwdriver (blade: 3.5x0.5 mm)
2) Press screwdriver in direction of arrow
3) Insert wire to round hole.
4) Remove screwdriver.
16
9 - 10 mm
to square hole.
to open spring in round hole.
Square hole
Round hole