Printer; Printer Interface If-8500; Loudspeaker Sem-21Q - Furuno FM-8900S Installation Manual

Vhf radiotelephone
Hide thumbs Also See for FM-8900S:
Table of Contents

Advertisement

1. HOW TO INSTALL THE EQUIPMENT
1.6

Printer

1.6.1
Printer PP-520
See the outline drawing for installation instructions.
1. Decide the location for the printer.
2. Set the ink ribbon cartridge and the roll paper to the printer. See the PP-520's Op-
erator's Manual for the procedures.
3. Set the fixtures (left/right) to the printer, and fasten them with four self-tapping
screws (φ5x20).
1.6.2
Printer PP-8800A
See the outline drawing at the back of this manual for information. This printer cannot
be connected to the Printer Interface IF-8500.
1. Make a cutout of 208(W)×133(H) mm in the mounting location.
2. Set the printer to the cutout and fasten the printer with four self-tapping screws
(4×16).
1.7

Printer Interface IF-8500

The Printer Interface IF-8500 allows the FM-8900S and other MF/HF radio communi-
cation equipment to share the Printer PP-520. See the outline drawing at the back of
this manual for installation instructions.
1.8

Loudspeaker SEM-21Q

The loudspeaker can be installed on a desktop, the overhead or a bulkhead. Fasten
the loudspeaker with the self-tapping screws, or nuts, bolts and washers. See the out-
line drawing at the back of this manual for dimensions.
405
4

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents