Table of Contents
Advertisement
Replacing the PCI-Fan Assembly
1.
Follow the instructions in "Before You Begin" on page
2.
Align the PCI-fan assembly with the metal bracket on the chassis.
3.
Slide the PCI-fan assembly into the chassis.
4.
Connect the PCI-fan assembly cable to the connector on the master
I/O board.
5.
Replace full-length PCI-Express cards, if any (see "Replacing the PCI-Express
Card(s)" on page 33).
6.
Replace the drive-bay shroud (see "Replacing the Drive-Bay Shroud" on
page 19).
7.
Close the PCI shroud (see "Closing the PCI Shroud" on page
8.
Replace the left side-panel (see "Replacing the Left Side-Panel" on page
9.
Connect your computer and devices to electrical outlets and then turn
them on.
6.
18).
11).
CHAPTER 8: FANS
045
/
045
Advertisement
Table of Contents
