Copying Your Recordings To An External Video Recorder - Canon HR10 Instruction Manual

• Refer also to the instruction manual of
the connected TV.
• You can play back discs recorded in HD
quality not only on HDTVs but also on
standard TVs. When you connect the
camcorder to a TV using the STV-100
Stereo Video Cable, the video output
will be converted to standard definition
automatically, without having to change
the [COMP.OUT] setting.
• If you connect to a TV using the HDMI
connection –connection type
component video connection –
connection type
1
full resolution of high-definition TV.
About the HDMI terminal
The HDMI (High-Definition Multimedia Interface) connection –connection type
convenient all-digital connection using a single cable for both video and audio. When
you connect the camcorder to an HDTV equipped with an HDMI terminal, you can
enjoy video and audio playback at the highest quality.
- The HDMI OUT terminal on the camcorder is for output only. Do not connect it to an
HDMI output terminal on an external device, as this may damage the camcorder.
- The HDMI connection will recognize automatically the highest resolution supported
by the connected HDTV, and output the optimal video signal to ensure the best
viewing experience. You can confirm the current specification of the video output by
checking the [HDMI STATUS] menu option (
- Correct operation cannot be guaranteed when connecting the camcorder to DVI
monitors.
- Some HDTVs have their HDCP digital content protection configured so as not to allow
the playback of personal content (video recorded for personal uses). If you cannot play
back the video recorded with this camcorder on your HDTV using the HDMI connection,
try connecting the camcorder using the component video connection –connection type
– instead.
1
- There will be no video output from the AV OUT terminal or the COMPONENT OUT
terminal while the camcorder is connected to an external device using an HDMI
cable. In such case, only audio will be output from the AV OUT terminal.
– or the
2
– you can enjoy the
Copying your Recordings to an External
Video Recorder
You can copy your recordings by
connecting the camcorder to a VCR or
a digital video device. Video output will
be in standard definition, regardless of
the quality of the original scenes.
Connecting
Connect the camcorder to the VCR
using connection type
the previous section Connection
Diagrams ( 93).
54).
( 26)
, as shown in
3
– is a
2
95