Canon HR10 Instruction Manual page 33

You cannot initialize the disc if the
remaining battery charge appears as
. Power the camcorder using the
compact power adapter.
Select ( ) the quality to be used
for recording the disc. For a
comparison between HD and SD
quality, refer to Decide what image
quality you want to use (
• Only if you inserted a DVD-RW
disc and selected [SD], continue to
step to select the disc
specification. In all other cases,
skip directly to step
Select ( ) the disc specification
and press ( ). For a comparison
between the [VIDEO] and [VR]
specifications, refer to Disc
specifications on DVD-RWs (
In the confirmation screen, select
( ) [YES] and press (
the disc initialization.
• The disc initialization will take
approximately one minute. Avoid
moving the camcorder while the
operation is in progress.
• You can start recording movies
once the record pause
indicator appears.
Removing the Disc
6).
1
.
7).
) to start
2
3
When you slide
recording, important file allocation data is
updated on the disc before the disc cover
opens. While the DISC access indicator is
on or flashing do not subject the
camcorder to shocks such as forcefully
laying it on a table.
OPEN
Slide fully in the direction of
the arrow and gently open the disc
cover completely until it stops.
• Do not subject the camcorder to
strong impacts while the DISC
access indicator is on or flashing.
• Retract the grip belt under the
camcorder so it will not get in the
way of the disc cover.
• It may take a moment after sliding
OPEN
for the disc cover to open.
Grab the edge of the disc and
gently pull it out.
Be careful not to touch the recording
surface of the disc or the pick up
lens.
Close the disc cover.
IMPORTANT
OPEN
after making a
33