System Setup (Volume, Beep, Etc.) - Canon HR10 Instruction Manual

Video
MARKERS
[ OFF], [ LEVEL(WHT)],
[ LEVEL(GRY)], [
[ GRID(GRY)]
You can display a grid or a horizontal
line at the center of the screen. The
markers are available in white or gray.
Use the markers as a reference to make
sure your subject is framed correctly
(vertically and/or horizontally).
• Using the markers will not affect the
recordings on the disc or memory
card.
LANGUAGE
[DEUTSCH], [ENGLISH], [ESPAÑOL],
[FRANÇAIS], [ITALIANO], [POLSKI],
ROMANA
[ ], [TÜRKÇE], [
[ ], [
[ ], [ ], [
[ ]
DEMO MODE
[ ON], [ OFF]
The demonstration mode displays the
camcorder's main features. It starts
automatically when the camcorder is
powered with the compact power
adapter if you leave it turned on without
loading a disc for more than 5 minutes.
• To cancel the demo mode once it
started, press any button, turn off the
camcorder or load a disc.
52
GRID(WHT)],
( 29)
],
], [ ],
], [ ],

System Setup (Volume, Beep, etc.)

SYSTEM SETUP
WL.REMOTE
[ ON], [ OFF
Allows the camcorder to be operated
with the wireless controller.
VOLUME
Adjust ( ) the volume of the
playback. You can also adjust the
volume referring to the joystick guide
( 41).
BEEP
[ HIGH VOLUME],
[ LOW VOLUME], [
A beep will accompany some
operations like turning on the
camcorder, the self-timer countdown,
etc.
POWER SAVE
[ ON], [ OFF]
In order to save power when the
camcorder is powered by a battery
pack, it will automatically shut off if left
without any operation for 5 minutes.
• Approximately 30 seconds before the
camcorder shuts off, the message
" AUTO POWER OFF" will appear.
]
OFF]