Photos; Basic Recording; Taking Photos - Canon HR10 Instruction Manual

Photos

Refer to this chapter for details on shooting photos – from capturing
and playing back images to printing them.

Basic Recording

Basic Recording

Taking Photos

Before using a memory card for the
first time, be sure to initialize it with
this camcorder (
1
Move the
set the camcorder in CAMERA
mode.
The red CAMERA indicator will turn
on.
2
Move the /
images).
72
84).
( 26)
switch to ON to
switch to (Still
3 PHOTO
Press halfway.
• Once the focus is automatically
adjusted, will turn green and
one or more AF frames will appear.
• When you press
wireless controller, the still image is
recorded immediately.
PHOTO
4
Press fully.
The CARD access indicator will flash
as the still image is being recorded.
IMPORTANT
Avoid the following actions while the card
access display (
and when the CARD access indicator is on
or flashing. Failing to do so may result in
permanent data loss.
- Do not subject the camcorder to
vibrations or strong impacts.
- Do not open the memory card slot cover
and do not remove the memory card.
- Do not disconnect the power source or
turn off the camcorder.
- Do not change the position of the
switch or the operating mode.
NOTES
• If the subject is not suitable for
autofocus, turns yellow. Adjust the
focus manually (
• When the subject is too bright,
"OVEREXP." starts flashing. In such
case, use the optional FS-H37U
ND filter.
PHOTO on the
) appears on screen,
/
59).