Canon HR10 Instruction Manual page 105

Problem
There is no sound from the TV.
The camcorder is connected using
the HDMI cable, but there is no
picture or sound from the HDTV.
The disc cannot be recognized by the
device. Or, even though the disc is
read, cannot play back the disc or the
picture is distorted.
Cannot edit my recordings or add
recordings to the disc with the DVD
device.
When writing on a disc in this
camcorder recordings transferred
from a computer, an error message
appears.
Memory Card Operation
Problem
Memory card cannot be inserted.
Cannot record on the memory card.
Memory card cannot be played back.
Image cannot be erased.
appears in red.
When connecting the camcorder to an HDTV using the CTC-100/S
Component Cable, make sure to connect also the audio connections using
the white and red plugs of the STV-100 Stereo Video Cable.
Disconnect the HDMI cable and then restore the connection or turn the
camcorder off and then on again.
The disc is dirty. Clean the disc with a soft lens-cleaning cloth.
Finalize the disc.
DVD-RW discs recorded in SD quality (VR mode) can only be played back
with VR mode-compatible DVD players. Refer to the instruction manual of
your DVD device.
Discs recorded in HD quality can only be played back with AVCHD-
compatible DVD players. Refer to the instruction manual of your DVD
device.
It may not be possible to edit or add recordings with an external DVD
recorder on a disc recorded with this camcorder.
The camcorder has exceeded its operational temperature. Turn off the
camcorder and let it cool down before resuming use.
Memory card was not facing the correct direction. Turn the memory card
over and insert it.
Memory card is full. Erase still images to free some space or replace the
memory card.
Memory card was not initialized. Initialize the memory card.
The folder and file numbers have reached their maximum value. Set
[FILE NOS.] to [RESET] and insert a new memory card.
Still images cannot be captured from the playback scene when [TV TYPE]
is set to [NORMAL TV].
Insert a memory card.
Set the camcorder to
Image is protected. Cancel the protection.
A memory card error occurred. Turn off the camcorder. Remove and
reinsert the memory card and set the camcorder back to
mode. If still appears in red, initialize the memory card.
Solution
Solution
mode.
93
–
111
68
–
–
–
–
34
77
84
53
53
34
75
83
84
105