5. Remove the dome cover
1
While pressing down the cabinet section
(F) on the opposite side of the rib mark
(E), open the dome cover in the arrowed
direction.
F
Push
2
Tighten the camera unit securely using
the supplied screw (G).
G
3
Plug the LAN cable into the LAN port on
the network board.
LAN port
6. Adjust/Check the video image from
the camera
b Set up the camera remotely (see page 11).
b Check the settings screen or camera
angle on a portable monitor (see page 11).
7. Install the dome cover
Align the rib marks (A) and push the dome
cover until it clicks.
E
8. Power on
Plug the PoE hub into a power outlet.
6
A