Changing A Particular Option - Samsung AM***FN1DEH series User Manual

SEG 3, 4, 5, 6, 8, 9 additional information
When the SEG 3 is set as "1" and follow Auto Change Over for HR only operation, it will operate as follows.
Temp.
Ts
Set temp.
for Auto mode
d
Cooling/Heating mode can be changed when Thermo Off status is maintained during the time with SEG9.

Changing a particular option

You can change each digit of set option.
Option SEG1
Explanation PAGE
Remote
Controller
Display
Indication Details Indication Details Indication Details Indication Details Indication Details Indication Details
Indication
and Details
0
Note • When changing a digit of an indoor unit address setting option, set the SEG3 as 'A' .
• When changing a digit of indoor unit installation option, set the SEG3 as '2' .
Ex) When setting the 'buzzer control' into disuse status.
Option
Explanation
Indication
Standard temp. for
→
Heating Cooling
c
b
Standard temp.
for Cooling
Standard temp.
for Cooling →
Heating
SEG2 SEG3
The option mode
MODE
you want to change
Option
D
mode
SEG1 SEG2
The option mode
PAGE MODE
you want to change
0 D
B C
A D
a
Standard temp.
for Heating
A : Set with SEG4(˚C)
B : Set with SEG5(˚C)
C : Set with SEG6(˚C)
D : Set with SEG8(˚C)
SEG4
The tens' digit of an The unit digit of an
option SEG you will option SEG you will
change
Tens' digit Unit digit of
1~6 0~9
of SEG
SEG3 SEG4
The tens' digit of an
option SEG you will
change
2 1
installing your air conditioner _57
SEG5 SEG6
Changed value
change
The
0~9 changed 0~F
SEG
value
SEG5 SEG6
The unit digit of an
option SEG you will C
hanged value
change
7 1