Samsung AM***FN1DEH series User Manual page 50

Setting an indoor unit address and installation option
Setting an indoor unit address (MAIN/RMC)
1.
Check whether power is supplied or not.
- When the indoor unit is not plugged in, there should be additional power
supply in the indoor unit.
2. The panel(display) should be connected to an indoor unit to receive option.
3.
Before installing the indoor unit, assign an address to the indoor unit according
to the air conditioning system plan.
4.
Assign an indoor unit address by wireless remote controller.
- The initial setting status of indoor unit ADDRESS(MAIN/RMC) is "0A0000-100000-200000-300000".
Option No. : 0AXXXX-1XXXXX-2XXXXX-3XXXXX
Option SEG1
Explanation PAGE
Remote
Controller
Display
Indication Details Indication
Indication
and Details
0
Option SEG7
Explanation PAGE
Remote
Controller
Display
Indication Details
Indication
and Details
1
When "A"~"F" is entered to SEG5~6, the indoor unit MAIN ADDRESS is not changed.

If you set the SEG 3 as 0, the indoor unit will maintain the previous MAIN ADDRESS even if you input the option value of SEG5~6.

If you set the SEG 9 as 0, the indoor unit will maintain previous RMC ADDRESS even if you input the option value of SEG11~12.

You cannot set SEG11 and SEG12 as F value at the same time.

50_ installing your air conditioner
SEG2 SEG3
MODE Setting Main address
Details Indication Details
No Main
0
address
Main
A
address
1
setting
mode
SEG8 SEG9
Setting RMC address
-
Indication Details
No RMC
0
address
RMC
address
1
setting
mode
SEG4 SEG5
100-digit of indoor
10-digit of indoor unit
unit address
Indication Details Indication
0~9 100-digit 0~9
SEG10 SEG11
Group channel(*16)
-
Indication
RMC1
Indoor Unit
1(L)
F2
2(N) F1
SEG6
The unit digit of an
indoor unit
Details Indication Details
A unit
10-digit 0~9
digit
SEG12
Group address
Details Indication Details
0~F RMC2 0~F