Service - Cub Cadet C460 series Operator's Manual

Service

Headlight Bulbs
1. Raise hood to get access to the headlight assembly.
2. Turn the bulb/socket assembly approximately a quarter
turn counterclockwise to align its tabs with the notches of
the reflector, then remove from the reflector. See Fig. 7-1.
3. Unplug the wire harness from the bulb/socket assembly.
4. Plug the new bulb/socket assembly into the wire harness.
5. Align the tabs of the new bulb/socket assembly with the
notches of the reflector and insert the bulb. Turn the bulb/
socket assembly clockwise to lock in place.
6. Lower and secure hood.
16
Figure 7-1
Fuses
1. Unlatch and lift hood forward to get access to under the
dash panel.
2. Remove fuse holder cover. See Fig. 7-2.
Figure 7-2
3. Remove the appropriate electrical fuse and replace with
proper amperage fuse.
4. Lower and secure hood.
7