Part 10 Confi Guring The Printer Setup - Casio KL-130 User Manual

Part 10 Confi guring the Printer Setup
The printer has a SET UP screen that you can use to confi gure a variety of
basic settings.
To confi gure the printer setup
1. Press FUNC and then .
2. Use and to select the SET UP item whose setting you want to
change, and then press OK.
3. Use the cursor keys to change the currently selected setting.
When this setting
is selected:
Use and
TAPE WIDTH
want to use.
Use and
ALIGN
you want (LEFT, CENTER, RIGHT, EQUAL).
• LEFT: Aligns text fl ush left.
• CENTER: Centers text.
• RIGHT: Aligns text fl ush right.
• EQUAL: Equally spaces text to fi ll the entire space
available.
Use and
PITCH
the pitch (space between characters): "NONE"
(0 mm), "NARROW" (1 mm), or "WIDE" (2 mm).
Changing this setting also causes the tape length to
change accordingly.
• This setting cannot be changed when EQUAL is
selected for the ALIGN setting, and when FIX is
selected for the TAPE LENGTH setting.
DEFAULT FONT
Use and
CONTRAST
Use and
DENSITY
Use and
Change its setting like this:
to select the tape width setting you
to select the text alignment setting
to select the following settings for
to select the font you want to use.
to adjust the display contrast.
to adjust the print density setting.
When this setting
is selected:
Use and
LANGUAGE
want to use.
Use and
cm/inch
as the unit of measurement.
4. Press OK to apply the setting.
Change its setting like this:
to select the display language you
to select centimeters (cm) or inches
21 EN