Troubleshooting - Casio KL-130 User Manual

Troubleshooting

• Power Supply
Nothing appears on the display.
Possible Causes
Battery power is low or the Load a fresh set of AA-size alkaline
wrong type of batteries batteries (supplied by you). Or use
are loaded in the printer. the specifi ed separately available AC
adaptor.
Improper display contrast Adjust display contrast.
setting
Batteries loaded Remove batteries and reload them
incorrectly correctly.
The AC adaptor is not Correctly connect the specifi ed
connected securely. separately available AC adaptor.
• Text Input
Cannot input text.
Possible Causes
FUNC key has been
Press
pressed. operation.
Action Page
6
7
22
21
7
22
Action Page
to clear FUNC key
9
• Printing
Tape does not come out when
Possible Causes
Tape cartridge Securely close the printer cover.
compartment cover is not
closed completely.
No more tape left in the Replace the tape cartridge with a
cartridge. new one.
Tape jam Remove the tape cartridge and pull
out the jammed tape by hand. Cut
off excess tape with scissors, and
carefully replace the cartridge into
the Label Printer.
Important!
Never allow the tape outlet to
become blocked and never touch
tape as it is being fed during printing.
Printing is blurred, blotched, broken, etc.
Possible Causes
Improper print density Adjust the print density setting.
setting
Improper loading of the Remove the tape cartridge and
cartridge reload it correctly.
Dirty printer head or Clean the printer head and roller.
rubber roller
Printer powers down while printing is in progress.
Possible Causes
Battery power is low or the Load a fresh set of AA-size alkaline
wrong type of batteries batteries (supplied by you). Or use
are loaded in the printer. the specifi ed separately available AC
adaptor.
is pressed.
Action Page
8
8
8
Action Page
21
8
22
Action Page
6
7
22
23 EN