Draytek Vigor2925 Quick Start Manual page 13

2.4G/5G/ On
WLAN
Blinking
VPN On
Off
Blinking
DMZ On
Off
Blinking
LED on Connector
Left LED
WAN1~WAN2
(Green)
Right LED
(Green)
Left LED
LAN1~LAN5
(Green)
Right LED
(Green)
2.4G/5G: Wireless access point with bandwidth of
2.4GHz/5GHz is ready.
WLAN: Wireless access point is ready.
It will blink slowly while wireless traffic goes through.
ACT and WLAN LEDs blink quickly and simultaneously when
WPS is working, and will return to normal condition after
two minutes. (You need to setup WPS within 2 minutes.)
The VPN tunnel is active.
VPN service is disabled.
Traffic is passing through VPN tunnel.
The DMZ function is enabled.
The DMZ function is disabled.
The data is transmitting.
On The port is connected.
Off The port is disconnected.
Blinking The data is transmitting.
On The port is connected with 1000Mbps.
Off The port is connected with 10/100Mbps.
On The port is connected.
Off The port is disconnected.
Blinking The data is transmitting.
On The port is connected with 1000Mbps.
Off The port is connected with 10/100Mbps.
8