DFI G586OPB User Manual page 82

PCI/ISA System Board
2. Copy the DEVICE.LOG file from the DOSDRV
directory of the diskette to /etc by typing the follow-
ing at the prompt: doscp a:/dosdrv/device.log /etc
3. Type:
cd /dev
mv dsk/finstall dsk/finstall.org ; mknod dsk/finstall b 2
164
mv rdsk/finstall rdsk/finstall.org ; mknod rdsk/finstall c 2
164
4. Type: installpkg
Note:
It may take a while for the system to respond. Do
not hit any key during this period.
5. Insert the "PC87410 PCI IDE SCO UNIX Drivers"
diskette into a floppy drive.
6. Press <Enter> to copy from floppy drive 0.
7. Press <Enter> to install the driver.
8. Type "Y" twice to make the newly built kernel as
the booting default.
9. For SCO 3.2.2, type:
For SCO 3.2.4
4-9 u IDE Device Drivers
cd /dev
mv dsk/f0.org dsk/f0
mv rdsk/f0.org rdsk/f0
cd /dev
mv dsk/finstall.org dsk/finstall
mv rdsk/finstall.org rdsk/finstall