Table of Contents
Advertisement
PCI/ISA System Board
Installing NetWare 3.11, 3.12, SFT-III, 4.00, 4.01 Driver
1. You must first install the DOS driver. (Run
INSTALL.EXE, under the DOSDRV directory, to
install the DOS driver).
2. Follow the installation procedures of the NetWare
installation manual.
Installing the Windows NT v3.x Driver
To install:
1. Insert the "PC87410 PCI IDE Device Drivers"
diskette into a floppy drive.
2. Run INSTALL.EXE, under the DOSDRV directory,
to configure and choose not to copy files to drive C.
3. After installing the driver, run Windows NT and use
the File Manager to run A:\NTDRV\SETUP.EXE.
4. Reboot the system.
To remove:
1. Use Windows NT' s File Manager to run
A:\NTDRV\UNINSTAL.EXE.
2. Reboot the system.
4-7 u IDE Device Drivers
Advertisement
Table of Contents
