Advertisement
The charger goes into Standby mode after the power is cut and the charging
•
does not start again
Explanation: The charger will turn into Standby if the voltage in the battery is
below 6V when the power is back on.
Test: Start the charging again by pressing on the mode button.
The error LED is lit
•
Explanation: Reverse polarity.
Test: Make sure that the + cable/clamp is connected to the + terminal and the
– cable/clamp is connected to the – terminal.
Trouble Shooting Guide
5
Advertisement
Need help?
Do you have a question about the XS 0.8 and is the answer not in the manual?
Questions and answers