Top Cover - Compaq Presario CQ45 Maintenance And Service Manual

Top cover

Description
Top cover (includes TouchPad and cable)
For use only in computer models with a fingerprint reader
For use only in computer models without a fingerprint reader
Before removing the top cover, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Remove the following components:
a. Hard drive (see
b. Optical drive (see
c. Keyboard (see
d. Switch cover (see
e. Speaker assembly (see
f. Display assembly (see
Remove the top cover:
1. Turn the computer upside down, with the front toward you.
2. Remove the seven screws that secure the top cover to the computer.
●
(1) Three Phillips PM2.5×10.0 screws
●
(2) Two Phillips PM2.5×5.0 screws
●
(3) Two Phillips PM2.0×3.0 screws
Battery on page 43).
Hard drive on page 46)
Optical drive on page
Keyboard on page 56)
Switch cover on page
Speaker assembly on page
Display assembly on page
44)
58)
60)
62)
Component replacement procedures
Spare part number
486860-001
486861-001
69