XVision VIS249D Instruction Manual

Colour 500tvl varifocal dome camera

Advertisement

TECHNICAL SUPPORT:
TECHNICAL SUPPORT:
For Technical Support for any Xvision product please contact your local
For Technical Support for any Xvision product please contact your local
distributor.
distributor.
LIMITED WARRANTY:
LIMITED WARRANTY:
This product is supplied with a 3 Year warranty. The Warranty excludes
This product is supplied with a 2 Year warranty. The Warranty excludes
products that have been misused, (including accidental damage) and
products that have been misused, (including accidental damage) and
damage caused by normal wear and tear. In the unlikely event that you
damage caused by normal wear and tear. In the unlikely event that you
encounter a problem with this product, it should be returned to the
encounter a problem with this product, it should be returned to the
place of purchase.
place of purchase.
8
Manufactured exclusively for:
Manufactured exclusively for:
Xvision (Europe) Group,
Xvision (Europe) Group,
Head Office: London, U.K.
Head Office: London, U.K.
Email: info@x-vision.co.uk
Email: info@x-vision.co.uk
Web: www.x-vision.co.uk
Web: www.x-vision.co.uk
CCTV
CCTV
Model:
Model:
Colour 500TVL Varifocal
Colour Varifocal Dome
Camera
Dome Camera

Before you begin

Please unpack the box carefully and identify that all the parts are present.
Please unpack the box carefully and identify that all the parts are present.
The camera is suitable for indoor use only. Please bear in mind the following points when
The camera is suitable for indoor or outdoor use. Please bear in mind the following points when
choosing a mounting position.
choosing a mounting position.
The camera must be positioned so that it will not point directly into the sun (sunrise and
The camera must be positioned so that it will not point directly into the sun (sunrise and
sunset) or any bright light, as this may cause damage to the camera.
sunset) or any bright light, as this may cause damage to the camera.
Avoid viewing areas where half the area is in bright sunlight and the other half is dark,
Avoid viewing areas where half the area is in bright sunlight and the other half is dark,
such as in the shadow of a building. All types of cameras have difficulty in 'seeing' with
such as in the shadow of a building. All types of cameras have difficulty in 'seeing' with
such a large lux level variation.
such a large lux level variation.
Do not cut the camera cables, this will void the warranty.
Do not cut the camera cables, this will void the warranty.
Make sure you use only the recommended power supply. Damage caused to the camera by
Make sure you use only the recommended power supply. Damage caused to the camera by
incorrect voltage or wiring is not covered by the warranty.
incorrect voltage or wiring is not covered by the warranty.
Model:
Model:
VIS238D
VIS249D
Colour Varifocal Dome Camera
Colour 500TVL Varifocal Dome
Camera
VIS249D
VIS238D
CCTV
CCTV

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the VIS249D and is the answer not in the manual?

Questions and answers

Summary of Contents for XVision VIS249D

  • Page 1: Before You Begin

    CCTV CCTV CCTV CCTV TECHNICAL SUPPORT: TECHNICAL SUPPORT: For Technical Support for any Xvision product please contact your local For Technical Support for any Xvision product please contact your local distributor. distributor. LIMITED WARRANTY: LIMITED WARRANTY: This product is supplied with a 2 Year warranty. The Warranty excludes This product is supplied with a 3 Year warranty.
  • Page 2 THANK YOU VERY MUCH FOR PURCHASING OUR PRODUCT Minimum Illumination: 0.1 Lux The VIS249D Colour Varifocal Dome camera is designed for high risk applications. It offers very high resolution 500 TVL images from its Sony Audio: 1/3" Super HAD CCD sensor, and has an Xvision Pixel+ Varifocal lens...
  • Page 3 AGC: Auto Gain Control High/Low AES: Auto Electronic Shutter BLC: Back Light Compensation • Xvision Pixel+ Varifocal 4.0 to 9.0mm lens with 30° to 64° viewing angle for super sharp images and easy selection of the optimum viewing angle during installation •...
  • Page 4: How To Operate

    4. Adjust the camera viewing angle by first tilting (STEP 1) then rotating How to Operate the camera module (STEP 2), and then turn the horizontal adjustment ring (STEP 3) to correct the image and achieve proper orientation (as 1. Connect the video output to the monitor or other video device shown in Figure 2).

Table of Contents