Toyotomi TKN/TKG-A528DV User Manual page 58

REMOTE CONTROLLER
SLEEP/PLASMA FUNCTION
• Press this button less than 2nds will initiate SLEEP function. And if keep pressing this button
more than 2nds,the PLASMA function is initiated.
• The sleep function enables the unit to automatically increase(cooling) or decrease(heating)
1ºC per hour for the fi rst two hours, then hold steady for the next 5 hours, after that the unit
will stop operation. It can maintain the most comfortable temperature and save energy.
NOTE: The SLEEP function is only available under Cooling, Heating and AUTO operations.
• When the PLASMA function is initiated, the Ionizer/Plasma Dust Collector(depending on
models) is energized and will help to remove
pollen and impurities from the air.
L/O / FOLLOW ME FUNCTION
• Press this button less than 2nds will initiate L/O function. And if keep pressing this button more
than 2nds,the FOLLOW ME function is initiated.
• When the Follow Me function is activated, the remote display is actual temperature at its
location. The remote control will send this signal to the air conditioner every 3 minutes interval
until press the FOLLOW ME button again.
• The Follow Me function is not available under DRY and FAN mode.
• Switch the operation mode or turn off the unit will cancel the Follow Me function automatically.
TRUBO/SELF CLEAN FUNCTION
• Press this button less than 2nds will initiate TURBO function. And if keep pressing this button
more than 2nds,the SELF CLEAN function is initiated.
• Turbo function enables the unit to reach the preset temperature in the shortest time. When
press this button on cooling mode, the unit will blow strong cooling air with super high fan
speed. When press this button on heating mode(applicable to the unit adopts PTC only), the
PTC will be energized and bring fast heating operation.
• Under SELF CLEAN mode, the air conditioner will automatically clean and dry the Evaporator
and keep it as fresh for the next operation.
58
GB