Indicators On Lcd - Toyotomi TKN/TKG-A528DV User Manual

REMOTE CONTROLLER
NOTE:
• Pressing the TURBO and SLEEP button, modifying the mode or adjusting the set temperature
to less than 24ºC will stop E/S operation.
• Under E/S operation, the set temperature should be 24ºC or more. It may result in insuffi cient
cooling. If you feel uncomfortable, just press the E/S button again to cancel this function.
11. FAN SPEED Button: Used to select the fan speed in four steps: AUTO
HIGH.
12. TIMER ON Button: Press this button to initiate the auto-on time sequence. Each press will
increase the auto-timed setting in 30 minutes increments. When the setting time displays
10H, each press will increase the auto-timed setting 60 minutes increments. To cancel the
auto-timed program, simply adjust the auto-on time to 0:0.
13. TIMER OFF Button: Press this button to initiate the auto-off time sequence. Each press will
increase the auto-timed setting in 30 minutes increments. When the setting time displays
10H, each press will increase the auto-timed setting 60 minutes increments. To cancel the
auto-timed program, simply adjust the auto-off time to 0:0
14. L/O / FOLLOW ME Button: Disable/Active indoor screen Display. When pushing more than 2
seconds, the FOLLOW ME function will be activated, pushing more than 2 seconds again to
disable.
15. LOCK Button: When you press the recessed LOCK button, all current settings are locked in
and the remote controller does not accept any operation except that of the LOCK. Press again
to cancel the LOCK mode.

INDICATORS ON LCD

auto cool dry heat fan
SET TEMP. TIMER ON OFF
sleep follow me lock
Transmission Indicator.
lights when remote controller transmits signals to the indoor
unit.
AUTO Function
COOLING Function
DRY Function
HEATING Function
FAN
run
Temp./Timer display. Displays the temperature
setting(17 C~30 C). When you set the operating mode to
FAN, no temperature setting is displayed. If in the TIMER
mode, shows the ON and OFF settings of the TIMER.
53
LOW MED
This transmission indicator
GB