Changing The Screen Displayed After Shots - Canon PowerShot SX400 IS User Manual

Quick Displays images only until you can shoot again.
Displays images for the specified time. Even while
2 sec., 4 sec.,
the shot is displayed, you can take another shot by
8 sec.
pressing the shutter button halfway again.
Hold Displays images until you press the shutter button halfway.
Off No image display after shots.

Changing the Screen Displayed after Shots

Change the way images are displayed after shots as follows.
Off Displays only the image.
Detailed Displays shooting details ( = 106).
When [Display Time] ( = 40) is set to [Off] or [Quick], [Display
●
Info] is set to [Off] and cannot be changed.
● By pressing the [
shooting, you can switch the display information. Note that the
settings of [Display Info] are not changed. You can also erase
images by pressing the [
images as favorites ( = 72) by pressing the [
Downloaded From camera-usermanual.com Canon Manuals
2
Configure the setting.
● Press the [ ][ ] buttons to choose
[Display Time]. Press the [ ][ ] buttons
to choose the desired option.
● To restore the original setting, repeat this
process but choose [Quick].
1
Set [Display Time] to [2 sec.],
[4 sec.], [8 sec.], or [Hold] (= 40).
2
Configure the setting.
● Press the [ ][ ] buttons to choose
[Display Info]. Press the [ ][ ] buttons to
choose the desired option.
● To restore the original setting, repeat this
process but choose [Off].
] button while an image is displayed after
] button, or protect ( = 67) or tag
] button.
Before Use
Basic Guide
Advanced Guide
1
Camera Basics
2
Auto Mode
3
Other Shooting Modes
4
P Mode
5
Playback Mode
6
Setting Menu
7
Accessories
8
Appendix
Index
41