Disabling Eye-Fi Transfer - Canon PowerShot SX400 IS User Manual

Disabling Eye-Fi Transfer

Configure the setting as follows to disable Eye-Fi transfer by the card, if
necessary.
● [Eye-Fi Settings] is not shown unless an Eye-Fi card is in the
camera with its write-protect tab in the unlocked position. For this
reason, you cannot change settings for an inserted Eye-Fi card if
the write-protect tab is in the locked position.
Downloaded From camera-usermanual.com Canon Manuals
● Press the [ ] button, choose [Eye-
Fi Settings] on the [ ] tab, and then
press the [ ] button.
● Choose [Eye-Fi trans.], and then choose
[Disable].
Before Use
Basic Guide
Advanced Guide
1
Camera Basics
2
Auto Mode
3
Other Shooting Modes
4
P Mode
5
Playback Mode
6
Setting Menu
7
Accessories
8
Appendix
Index
100