Protecting All Images At Once - Canon PowerShot SX400 IS User Manual

Protecting All Images at Once

Clearing All Protection at Once
You can clear protection from all images at once.
To clear protection, choose [Unprotect All Images] in step 1 of "Protecting
All Images at Once", and then complete step 2.
Downloaded From camera-usermanual.com Canon Manuals
1
Choose [Protect All Images].
● Following step 2 in "Using the Menu"
( = 67), choose [Protect All Images]
and press the [ ] button.
2
Protect the images.
● Press the [ ][ ] buttons to choose [OK],
and then press the [ ] button.
Erasing Images
You can choose and erase unneeded images one by one. Be careful
when erasing images, because they cannot be recovered. However,
protected images ( = 67) cannot be erased.
1
Choose an image to erase.
● Press the [ ][ ] buttons to choose an
image.
2
Erase the image.
● Press the [ ] button.
● After [Erase?] is displayed, press the
[ ][ ] buttons to choose [Erase], and
then press the [ ] button.
● The current image is now erased.
● To cancel erasure, press the [ ][ ]
buttons to choose [Cancel], and then
press the [ ] button.
Erasing Multiple Images at Once
You can choose multiple images to erase at once. Be careful when
erasing images, because they cannot be recovered. However, protected
images ( = 67) cannot be erased.
Choosing a Selection Method
1
Access the setting screen.
● Press the [
choose [Erase] on the [
Before Use
Basic Guide
Still Images Movies
Advanced Guide
1
2
3
4
5
6
7
8
Index
] button, and then
] tab ( = 25).
Camera Basics
Auto Mode
Other Shooting Modes
P Mode
Playback Mode
Setting Menu
Accessories
Appendix
69