Canon PowerShot SX400 IS User Manual page 103

Recording to the memory card takes too long, or continuous shooting is
slower.
● Use the camera to perform low-level formatting of the memory card ( = 81).
Shooting settings or FUNC. menu settings are not available.
● Available setting items vary by shooting mode. Refer to "Functions Available in
Each Shooting Mode", "FUNC. Menu", and "Shooting Tab" ( = 107 – = 110).
Shooting Movies
The elapsed time shown is incorrect, or recording is interrupted.
● Use the camera to format the memory card, or switch to a card that supports
high-speed recording. Note that even if the elapsed time display is incorrect, the
length of movies on the memory card corresponds to the actual recording time
( = 80, = 116).
[ ] is displayed and shooting stops automatically.
● The camera's internal memory buffer filled up as the camera could not record to
the memory card quickly enough. Try one of the following measures.
Use the camera to perform low-level formatting of the memory card ( = 81).
-
Lower the image quality ( = 38).
-
Switch to a memory card that supports high-speed recording ( = 116).
-
Zooming is not possible.
● Zooming is not possible when shooting movies in [
Playback
Playback is not possible.
● Image or movie playback may not be possible if a computer is used to rename
files or alter the folder structure. Refer to "Software Instruction Manual" ( = 89)
for details on folder structure and file names.
Playback stops, or audio skips.
● Switch to a memory card that you have performed low-level formatting on with the
camera ( = 81).
● There may be brief interruptions when playing movies copied to memory cards
that have slow read speeds.
● When movies are played on a computer, frames may be dropped and audio may
skip if computer performance is inadequate.
Downloaded From camera-usermanual.com Canon Manuals
Sound is not played during movies.
Adjust the volume ( = 77) if you have activated [Mute] ( = 77) or the sound
●
in the movie is faint.
● No sound is played for movies shot in [
recorded in this mode.
Memory Card
The memory card is not recognized.
Restart the camera, with the memory card in it ( = 22).
●
Computer
Cannot transfer images to a computer.
● When attempting to transfer images to the computer via a cable, try reducing the
transfer speed as follows.
-
Eye-Fi Cards
] mode ( = 45).
Cannot transfer images ( = 99).
] mode ( = 45) because audio is not
Press the [ ] button to enter Playback mode. Hold the [
down as you press the [ ] and [ ] buttons at the same time. On the next
screen, press the [ ][ ] buttons to choose [B], and then press the [
Before Use
Basic Guide
Advanced Guide
1
Camera Basics
2
Auto Mode
3
Other Shooting Modes
4
P Mode
5
Playback Mode
] button
6
Setting Menu
] button.
7
Accessories
8
Appendix
Index
103