Nfc Module (Nfc1) - Sony HT-GT1 Service Manual

HT-GT1
2-5.

NFC MODULE (NFC1)

flexible flat cable (8P)
top side
filament tape
(sub material)
Note: When installing the flexible flat cable, ensure that
the colored line is parallel to the connector after insertion.
OK
Insert straight into the interior.
flexible flat
cable
colored line
connector
10
2 filament tape
(sub material)
NFC holder
–
NG
Insert at a slant.
flexible flat
cable
colored line
connector
flexible flat cable (8P)
5 filament tape
(sub material)
3 screw
(BVTP2.6)
NFC holder block
–
top side
The lower side is
the terminal side.
6 flexible flat cable (8P)
(FFC3)
8 NFC module
(NFC1)
7 Peel the NFC module (NFC1)
off of the PSA tape (5T15).
4 Remove the NFC module block
in the direction of the arrow.
1 Remove the wire
from the clamp.
1 Remove the wire
from the clamp.
clamp
clamp
flexible flat cable (8P)