Revision History - Sony HT-GT1 Service Manual

HT-GT1

REVISION HISTORY

Ver. Date
1.0 2014.07 New
1.1 2014.09 Addition of US, Russian, Mexican, Chilean, Peruvian, Brazilian and Singapore models
Change of BUTTON, DISPLAY, IR, SMPS, USB and VOL boards (Suffi x-12)
Deletion of FERRITE CORE (FC1) and PEF CUSHION (T100) (African, Latin American, Mexican,
Deletion of Part No. for SPEAKER CABINET ASSY (Not supplied)
Change of MAIN and SPK-LED-H-L boards (Suffi x-12) (SUPPLEMENT-1)
1.2 2015.01 Addition of Argentina and Thai models
Change of Part No. for FRONT PANEL ASSY (Ref. No. 105)
Change of Part No. for POWER-SUPPLY CORD (Ref. No. AC1) (US and Brazilian models)
How to search for a contact point of signal lines or the like in DIAGRAMS SECTION
If a contact point of a BLOCK DIAGRAM, PRINTED WIRING BOARD or SCHEMATIC DIAGRAM is shown in a different page, use
the PDF fi le search function to fi nd one.
e.g.) If a contact point is shown as
Procedure:
1. Press the [F] key while pressing the [Ctrl] key.
2. Input ">001Z" in the search box and press the [Enter] key.
3. The relevant part (page), where the contact point is shown, appears.
Note: If you still see the original page, press the [Enter] key again.
Description of Revision
Chilean, Peruvian, Brazilian, Singapore, Indian and Iranian models)
, follow the procedure below.
(SMR-14023)
(SMR-14045)