Tcp/Ip; Ip Addr. Setting - Oki mc160n Network Manual

TCP/IP

Purpose
Options
Default

IP ADDR. SETTING

Purpose
Options
Default
Range
Notes
1-8
Downloaded From ManualsPrinter.com Manuals
Enables or disables TCP/IP.
If is selected, TCP/IP is enabled.
ENABLE
If DISABLE is selected, TCP/IP is disabled.
DISABLE/ENABLE
ENABLE
Sets the IP address of this machine on the network.
Sets the subnet mask of the network. The subnet mask
allows you to limit access to your machine (for example,
according to departmental divisions).
Sets the address of the router/gateway when a router/gate-
way is used on your network and you allow users outside
your network environment to print on your machine.
AUTO/SPECIFY
AUTO
(If IP ADDR. SETTING is set to SPECIFY)
IP ADDRESS: 0.0.0.0
SUBNET MASK: 255.255.255.0
GATEWAY: 0.0.0.0
(If IP ADDR. SETTING is set to SPECIFY)
0-255 for each xxx triplet
Use the keypad to input each number; use the
keys to move between triplets.
A single digit number, such as "1", cannot be input as "001".
Align the number on the left and input "1" as "1 _ _". Use
the and keys to move between triplets.
The B key can also be used for deleting. To cancel IP
ACK
Address menu, hold down the B
second, and then press the B
tings have been cleared.
key for more than one
ACK
key again after all set-
ACK
NETWORK SETTING Menu
and