Setting Time/Date (Time&Date) - Olympus DS-660 Instructions Manual

Setting Time/Date (TIME&DATE)
If you have set the time and date, information as to when an audio file is recorded is stored
automatically with that file. The time and date should be set to ease file management tasks. The
time and date setting is also needed to perform the alarm playback function ( P.29).
The hour indicator will flash automatically when you load batteries before using the
recorder for the first time, or after the recorder hasn't been used for a long time. Proceed
from step 1.
Time/Date Screen
4
1
DISPLAY
button
(switching the
data displayed)
STOP
button
(Exits the menu)
10
1
Set the hour.
1 Press the FF/+ button or REW/– button
2 Press the REC/SET button to accept
5
• You can choose between 12 and 24 hour
3
display by pressing the DISPLAY button
while setting the hour and minute.
Example: 5:45 P.M.
2
2
Set the minute.
1 Press the FF/+ button or REW/– button
REC/SET
2 Press the REC/SET button to accept
button
(accepts a
choice and
3
moves on to the
Set the year.
next item)
1 Press the FF/+ button or REW/– button
2 Press the REC/SET button to accept
FF/+ or
REW/–
• You can choose the order of the year,
button
month, day by pressing the DISPLAY
(alters a choice)
button while setting them.
to set the hour.
the hour.
PM 5:45 ←→ 17:45
(Initial setting)
to set the minute.
the minute.
to set the year.
the year.