After Use - Makita LS0714 Instruction Manual

ACCESSORIES
CAUTION:
• These accessories or attachments are recommended for use with your Makita tool specified in this manual. The
use of any other accessories or attachments might present a risk of injury to persons. Only use accessory or
attachment for its stated purpose.
If you need any assistance for more details regarding these accessories, ask your local Makita service center.
• Carbide-tipped saw blades
• Vise assembly (Horizontal vise)
• Vertical vise
• Socket wrench 10
• Holder set
• Holder assembly
• Holder rod assembly

After use

• After use, wipe off chips and dust adhering to the tool with a cloth or the
like. Keep the blade guard clean according to the directions in the
previously covered section titled "Blade guard". Lubricate the sliding
portions with machine oil to prevent rust.
• When storing the tool, pull the carriage toward you fully so that the slide
pole is thoroughly inserted into the turn base.
To maintain product SAFETY and RELIABILITY, repairs, any other mainte-
nance or adjustment should be performed by Makita Authorized Service Cent-
ers, always using Makita replacement parts.
•
•
•
•
•
•
Set plate
Dust bag
Triangular rule
Lock-off button (2 pcs.)
Fluorescent tube
Hex wrench
27