Administrator/User Password; Reboot; Reset To Factory - Yealink SIP-T20P User Manual

Enterprise IP Phone

Administrator/User Password

Administrator mode grants unlimited access to the phone configuration on both web
and phone user interface. The administrator/user password is used to access:
Web interface along with user name.
the advance settings of the phone such as Network, Account, Reset to Factory
Settings via the Phone interface.
The default administrator password is admin. Meanwhile the user name for Web
interface access is admin.
To change the administrator password via Phone interface:
1) Press MENU->Settings->Advanced->OK->Set Admin PWD->OK.
2) You are prompted to enter the old PWD, new PWD and Confirm PWD, Press abc to
change the input method.
3) Press OK button to confirm the change, or MENU to return to previous menu.
To change the administrator password via Web interface:
Choose Security, enter the old, new password and Confirm Password, choose Confirm
button to save the changes, or Cancel button to cancel the changes.

Reboot

You should reboot the phone when you are challenged, e.g. after applying changes to
the phone configuration.
To reboot via Web interface:
1) Choose Upgrade->Basic.
2) Click Reboot button.
Note:
You can only reboot from Web interface. Please do not power off during reboot, or it will
cause the flash memory error.

Reset to Factory

You should reset the phone only in this case: the phone configuration was changed and
the phone is not functioning anymore. To maintain the configuration of the phone, you
need your system administrator or service provider's advice.
To reset to factory via phone interface:
1) Press MENU->Settings->Advanced.
2) You are prompted to enter the required password, the default one is admin.
3) Scroll to Reset Setting, press OK button.
4) You are prompted to confirm the change, press OK to reset to factory settings, or
MENU to return to previous menu.
Using the Advanced Phone Functions
- 28 -