Enterprise IP Phone
Maintenance Tasks
Administrator Mode
The phone allows two modes to configure the phone:
User Mode
Administrator Mode
Administrator mode grants unlimited access to the phone configuration on both Web
and Phone interface. User Mode is not able to access the settings on the Phone interface
such as: Accounts, Network, Reset to Factory, other phone settings.
Administrator/User Password
Administrator mode grants unlimited access to the phone configuration on both web
and phone user interface. The administrator/user password is used to access:
Web interface along with user name.
the advance settings of the phone such as Network, Account, Reset to Factory
Settings via the Phone interface.
The default administrator password is admin. Meanwhile the user name for Web
interface access is admin.
To change the administrator password via Phone interface:
1) Press the softkeys Menu, scroll to Settings, press Enter softkey, use the navigation
keys to highlight Advance Settings.
2) You are prompted to enter the required password, the default one is admin.
3) Scroll to Set Admin Password, press Enter softkey.
4) You are prompted to enter the old and new password, Press Ab3 softkey to change
the input method.
5) Press OK softkey to confirm the change, press Cancel softkey to return to previous
menu.
To change the administrator password via Web interface:
Choose Security, enter the old, new password and Confirm Password, choose Confirm
button to save the changes, or Cancel button to cancel the changes.
Reboot
You should reboot the phone when you are challenged, e.g. after applying changes to
VoIPon www.voipon.co.uk sales@voipon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299
Using the Advanced Phone Functions
- 32 -