Pioneer KJR-12B/DP(T)-F-1 Installation Manual page 4

NOTE: DO NOT allow water to enter the remote control.
Use the trap and putty to seal the wires.
Putty
Trap
Fig. 4
a. For exposed mounting, cut holes on three of the
sides according to Fig. 5.
b. For shielded wiring, please refer to Fig. 6.
Putty
Putty
Trap
Trap
4
Cut three holes for wire outlet
Fig. 5
Embedded switch box wiring
Wiring hole
Fig. 6
5
Wiring through the wall
Wall hole and wiring hole
Diameter of wall hole: Φ 2cm