Pioneer KJR-12B/DP(T)-F-1 Installation Manual page 3

An overview of the wall-mounted remote control wire outlet
Left side
wire outlet
TIMER
ON
TIMER
OFF
HEATER
Fig. 1
1. Wiring diagram
Refer to the following diagram to wire the wall-mounted
remote control to the indoor unit.
Wire Joint, 5p
5-Core Shield Cable
Fig. 2
Top side wire outlet
Right side
wire outlet
FOLLOW
ECO
ME
AUXIL
MODE FAN SPEED SWING TEMP
RESET LOCK
Bottom side wire outlet
Infrared Pipe
+5V
RUN GND
Indoor Unit Switch Board
Indoor Unit
2. Installation Diagram
Connect the wire from the display panel of the indoor
unit to a connecting cable. Then connect the other side
of the connecting cable to the remote control.
NOTE: Be sure to reserve a length of the connecting wire
for periodic maintenance.
2 3
The connective wires group
5-core wire
Fig. 3
Front grille