Chapter 4. Configuration And Usage - Binatone SW-GE1008F User Manual

3.3 Announcements

Please pay attention to placed switches, that will cause serious consequences when it fall.

It should be under the correct power supply to work properly, please confirm the power supply before using.

In order to reduce the risk of electric shock, do not open the enclosure when it work, even in the case of no
charge, also do not to open.

When the switch connect with workstation, server, the HUB or the other switches, if the cable to use is the
UTP (unshielded twisted pair), its length is not greater than 100 meters.

Cat3 or above Cat3 UTP for 10Base-T Ethernet.

Cat5 or above Cat5 UTP for 100Base-T Ethernet.

Cat5 or Cat6 UTP or above for 1000Base-T Ethernet.

The reticle can be inserted or pulled out of switch's port when it work and won't interrupt it.

Before cleaning switch, please pull out the attaching plug of switch and use wet fabric to wipe, liquid
washing is not available.

Don't put the switch in the water side or damp places, and to prevent water and moisture into the switch
cabinet

When placed in the switch, please avoid dusty and strong electromagnetic interference region

Chapter 4. Configuration and usage

9