Vlan Configuration - Binatone SW-GE1008F User Manual

Jumbo frames： Allowing super-long frames or not.

Link: link-state of switch port be displayed
 Mode: Port working mode configuration. There are seven options "Auto Speed"、"10Half"、"10Full"、
"100Half"、"100Full""1000Full"、"Disable"
 flow control :make flow control function. Mark "√" In the select box to start using flow control functions,
select box shows blank to indicate stopping the flow control function.
Discarding frames whether or not when in congestion setting package processing.
Start 802.3az standard: open the energy saving mode


VLAN configuration

VLAN configuration 802.1 Q VLANs configuration. Basic knowledge about VLAN refer to section 4.3

802.1Q VLANS Configuration
Switches in different work mode setting is different. In 802.1 Q mode, mainly including senior 802.1 Q
VLAN configuration and PVID configuration(as following figure)

Group of VLAN list: existing group of VLAN list

Modification: modifying existing group of VLAN ;Into the senior VLAN configuration.

Deletion: delete the existing group of VLAN
Picture 5-11 802.1 Q mode
20