Advertisement
Quick Links
Procedure to Reset and reconfigure Binatone ADSL router
First Hard reset the Binatone ADSL router as follows:
How to Hard Reset the Modem
There is a "RESET" button at the back side of modem as shown below :
Press the RESET button with pointed object like pin or pen for 5 seconds or till all LEDs on
modem go down and modem reboots.
Advertisement
Related Manuals for Binatone DM 856W
Summary of Contents for Binatone DM 856W
- Page 1 Procedure to Reset and reconfigure Binatone ADSL router First Hard reset the Binatone ADSL router as follows: How to Hard Reset the Modem There is a “RESET” button at the back side of modem as shown below : Press the RESET button with pointed object like pin or pen for 5 seconds or till all LEDs on...
- Page 2 User Guide for Binatone ADSL CPE - Model : DM 856W 150M Wireless ADSL2+ Router This user guide contains procedure for: i. Configuration to set up a PPPoE connection for IPv4 Internet access. ii. Verification of Internet connection status. iii. Change DNS address setting of ADSL Router.
- Page 3 b. Select Interface setup then click on Internet. c. ATM VC Settings : Select PVC - 0, Status –Activated, VPI - 0 and VCI – 32 ( Change only if required.) d. IPV4/IPV6 : IP version : select IPV4 button.
- Page 4 e. Under the Encapsulation heading select ISP PPPoA/PPPoE f. Under PPPoE/PPPoA enter the service name as MTNL, Username as the “Telephone number of the Customer and attach @a after Username if connected to SOTL or Alcatel network”, Password as CA number or the working password of the user.
- Page 5 h. Save the configuration. i. To make the changes permanent restart the router. Select Maintenance then SysRestart, then System Restart with Current Settings. Then click on Restart. 2. Verification of Internet connection status : Click on Status Tab. Under WAN - check the IP address, subnet and gateway, all should be present, it indicates Internet connection is OK.
- Page 6 3. Change DNS IP address setting of ADSL CPE : a. Select Interface setup then click on LAN. b. Under DNS change as Primary DNS server : 59.185.3.10 and Secondary DNS server : 59.185.3.11 c. Save the configuration.
- Page 7 User Guide for Wireless security Model : Binatone DM 856W 150M Wireless ADSL2+ Router This guide provides you simple steps to secure your wireless router. Wi-Fi ON/OFF switch : Wireless access to the Wireless ADSL router can be opened or closed with the help of a physical Wi-Fi ON/OFF switch provided on the front panel of the Wireless ADSL router.
- Page 8 Step 4: Note the Pre-shared key. It is required to set it on the client like LAPTOP or Mobile for wireless access to this Wireless ADSL Router. ( It is better to change the Pre-shared key. To change the Pre-shared key enter the desired key at Pre-shared key field and save the setting.
- Page 9 Restricted Access based on MAC Address Restricting of access to Wireless ADSL router can also be done by putting MAC Address of NIC Card ( Wireless Adapter / Wireless network connection) from which only access to be allowed. The procedure is as explained below: Step 1.
Need help?
Do you have a question about the DM 856W and is the answer not in the manual?
Questions and answers